Silicones, Inc.Silicones, Inc.RTV-2 Silicone Rubber
All products

Technical Datasheet · P-378

Flame-retardant platinum-cure RTV-2 potting and encapsulation silicone

Platinum cure (addition)

Key properties

Shore A hardness (7 day)70Shore A

Feels like a shoe heel. Hard, with minimal flex.

Mixed viscosity7,500–8,500cps

Log scale. Lower viscosity pours thinner and captures finer detail; higher viscosity holds on vertical surfaces.

Mix ratio (wt)50:50
Working time4.0–4.0hours
Cure time24–24hours
Tear resistance30ppi

General Information

P-378 RTV silicone rubber is a black two-component, addition reaction, platinum-catalyzed system that cures at room temperature. It has a low viscosity, is easy to process and its cure rate can be accelerated with heat. It has excellent electrical and thermal properties and is reversion resistant. In addition, it offers outstanding fire resistant properties.

The information contained in this data sheet is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are beyond our control, Silicones, Inc. disclaims any liability incurred in connection with the use of our products and information contained herein.

Typical Properties

Uncatalyzed Compound

Color
Base:Black or off-whiteActivator:Off-white
Viscosity
Base:7,500–8,500cpsActivator:7,500–8,500cps
Mixing Ratio
By weight:50:50By volume:n.a.
Mixed Viscosity
7,500–8,500cps
Working Time
4.0–4.0hours
Cure Time
24hours
Shelf Life
2months

Vulcanized (Cured) Properties

Measured at 7 days, 70°F / 50% relative humidity

Shore A Hardness
One day:637 days:70
±4 durometer
Tear Resistance
30 ± 5ppiASTM D624
Tensile Strength
500 ± 50psiASTM D412
Elongation
150 ± 25%ASTM D412
Service Temperature
-60 to 425°F
Shrinkage
n.a.
Specific Gravity
1.45
Coverage
n.a.
Volume Resistivity (ohms/cm)
1 x 10^15
Dissipation Factor (@ 100 Hz)
0.008
Dielectric Constant (@ 100 Hz)
3.1
Dielectric Strength (volts/mil)
500
Thermal Conductivity (cal/cm2/oC/sec/cm)
7 x 10^-4

Take this datasheet with you

Print it, or save it as a PDF.

Planning a job? Confirm fit with our team first. Contact us.